AtmosAir Commercial Air Purification Systems
Whether for a commercial office building, a healthcare center or hospital, a hotel room, hallway, kitchen or convention facility, a gym or sports locker room, our products range in application from 500 sq. ft. to several hundred thousand sq. ft. and everything in between.
Some models are ready off the shelf for straight installations while other projects require a customized solution. Either way, we have the right product for your application.
ProMedUSA+AtmosAir Model SG-508FC
Voltage: 110 – 250 VAC
Energy Use: 55 watts
Number of Tubes: Eight (8)
Tube Size: F (559mm)
Capacity: Up to 25,500 CMH
Application: The AtmosAir 508FC BPI system is intended to be mounted in a supply duct or supply plenum of an air handling unit. The system can be integrated on an OEM basis or a retrofitted into an existing mechanical system. The size and number of 508FC ionization systems is dependent upon the airflow, size of the space, and severity of the pollution and odors.
ProMedUSA+AtmosAir Model
SG-500FC
Voltage: 110 – 250 VAC
Energy Use: 52 watts
Number of Tubes: Five (5)
Tube Size: F (558mm)
Capacity: Up to 17,000 CMH
Application: The AtmosAir 500FC BPI system is intended to be mounted in a supply duct or supply plenum of an air handling unit. The system can be integrated on an OEM basis or a retrofitted into an existing mechanical system. The system is calibrated at the factory per AtmosAir recommendations to attain bi-polar ion levels between 500 and 1,500 ions/cm3.
ProMedUSA+AtmosAir Model SGFC-102
Voltage: 120 VAC/240 VAC
Energy Use: 6 watts
Number of Tubes: 2
Tube Size: E (14″)
Capacity: Up to 5,000 CFM
Application: The AtmosAir FC-102 ionization system is intended to be mounted in the supply discharge in smaller air handling systems such as fan coils, heat pumps, RTU’s, and other unitary type systems.
The system can be integrated on an OEM basis, or a retrofit package is also available. The unit will be calibrated at the factory per AtmosAir recommendations or the contractor will calibrate the ionization setting to attain ion level readings of between 350 and 1,500 negative ions/cm3 in the space.
ProMedUSA+AtmosAir Model SGMH-880
Voltage: 115 – 120 VAC
Energy Use: 6 watts
Number of Tubes: 1
Tube Size: C(178mm)/D(241mm)/E(375mm)/F
Capacity: Up to 4,250 CMH
Application: The Matterhorn 880 ionization system is intended to be mounted in the supply air duct or air handling system of a heating, cooling or ventilation system. The unit is intended to produce bi-polar ions when airflow is delivered over the ion tubes. Power to the unit can be controlled with an optional air pressure differential switch or interlocked with HVAC fan operation, provided the power delivered to the unit does not exceed its rated voltage. Ionization intensity can be adjusted with a 5 step knob on the unit. Power to the unit can be turned off at the unit or a quick disconnect at the power cord.
ProMedUSA+AtmosAir Model SGMH-882
Voltage: 115 VAC
Energy Use: 6 watts
Number of Tubes: 2
Tube Size: C(178mm)/D(241mm)/E(375mm)/F
Capacity: Up to 8,500 CMH
Application: The Matterhorn 882 ionization system is intended to be mounted in the supply air duct or air handling system of a heating, cooling or ventilation system. The unit is intended to produce bi-polar ions when airflow is delivered over the ion tubes. Power to the unit can be controlled with an optional air pressure differential switch or interlocked with HVAC fan operation, provided the power delivered to the unit does not exceed it’s rated voltage. Ionization intensity can be adjusted with a 5 step knob on the unit. Power to the unit can be turned off at the unit or a quick disconnect at the power cord.
ProMedUSA+AtmosAir Model SGFC-100
Voltage: 115 VAC/240 VAC
Energy Use: 5 watts
Number of Tubes: One (1)
Tube Size: C (285.8 mm) D (336.6 mm) E (463.6 mm)
Capacity: Up to 4,080 CMH
Application: The AtmosAir FC100 ionization system is intended to be mounted in the supply discharge in smaller air handling systems such as fan coils, heat pumps and other unitary type systems. The system can be integrated on an OEM basis, or a retrofit package is also available. Access to the unit’s control panel is provided. The system is calibrated at the factory per AtmosAir recommendations to attain bi-polar ion levels between 500 and 1,500 ions/cm3.
ProMedUSA+AtmosAir Model SGFC-400
Voltage: 110 ~ 250 VAC
Energy Use: 7.68 watts
Number of Tubes: One (1)
Tube Size: B (55.88mm)
Capacity: Up to 2,380 CMH
Application: AtmosAir FC400 is a company BPI system ideal for fan coil units, PTAC, unit ventilators, or VRF cassettes. The size and number of ionization systems is dependent upon the airflow, size of the space, and severity of the pollution and odors.
ProMedUSA+AtmosAir SG–RAINIER R1 & R2
Voltage: 120 VAC
Energy Use: 45 watts
Number of Tubes: One (1)
Tube Size: B
Capacity: Up to 93 Square Meter
Application: The AtmosAir Rainier Summit is a standalone self-contained BPI system designed to increase ionization levels to restore indoor air to its natural state where no pollution or contaminants exist. AtmosAir Rainier also includes media filtration with an option of carbon filtration.
ProMedUSA+ Safeguard PRO
Voltage: 100-240 VAC
Energy Use: 60 watts
Dimensions (H*W*D): 895*412*276mm
Area: up to 130 sqM
Application: AtmosAir RIA’s patented bi-polar ionization technology received an outstanding microbiological efficacy testing results on human coronavirus from Microchem Laboratory, one of the world’s prominent. This testing confirms a 99.2% reduction of the human corona virus within 30 minutes by RIA bi-polar ionization technology.
